WiMoSpeed v1.06

Description:
WiMoSpeed lets you change the CPU-speed.

In opposite to other tools, even to the predecessor OverClockTool (OCT), it manipulates the values WM uses for clock control. So it works reliable on battery and AC without any scripting or active components.

Auto start WiMoSpeed to desired speed:

Note: one advantage to installing WiMoSpeed to storage card is that if device ever won't boot at new speed, the card can be removed and the device will boot at original speed.

1. MOST IMPORTANT: Ensure WinMoSpeed will function safely on your device at desired speed by using it for several days while setting the speed manually.
2. Run WiMoSpeed, set to desired speed, click "create link with current settings". This will create a lnk file under the install directory, usually "/Program Files/WiMoSpeed" or "/Storage Card/Program Files/WiMoSpeed".
3. Copy that lnk file to the "/Windows/Start Up" folder.
4. Reboot device.
5. Run WiMoSpeed to verify "current CPU speed" is correct.

TECHNIQUE

Basically WiMoSpeed is hardware-independent, because it lets WM change clock speed. But I couldn't get WM to switch the clock reliable on request so WiMoSpeed had to switch the clock registers itself on setting a new speed.
Therefore WiMoSpeed depends on CPU-hardware, RADIO- and OS-ROM.

Raising or lowering cpu speed didn't change battery drain or device temperature noticeable. So there isn't dynamic clocking in WiMoSpeed, but WM is still controlling and changing cpu-speed on battery.

History:

Version 1.06
- checks ROM-identification at startup
- support for Pure
- added support for more OEMXIPs
- added support for more RADIOs

Version 1.05
- support for Quartz
- added support for more OEMXIPs
- added support for more RADIOs

Version 1.04
- blackstone problem should be solved now (tested by tsalta with Blac016 / 1.17.25.09)
- added support for more ROMs
- support for Raphael / Fuze, Diamond, Kovsky / Xperia
- GUI shows ROM identification

Version 1.03
- blackstone problem (speed cut in half after sleep) should be solved
- added support for more ROMs
- changes in GUI (you have to create your links again; old ones starts the GUI only)

Version 1.02
- added support for more devices
- added support for more ROMs

Version 1.01
- added support for more OS-ROMs
- added support for more radio-ROM
- new function: restore default speed (528 MHz)

Version 1.00
- Initial release
- Rhodium, RhodiumW


Requirements:
* Windows Mobile 6.x
* Microsoft .NET CF 3.5

More information:
WiMoSpeed

Download
Mirror #1
Mirror #2